시험패스가능한VNX301최고품질인증시험기출자료공부하기

Wiki Article

ExamPassdump Versa Networks VNX301덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의 시험 문제들을 커버하는,수년동안 가장 최근의Versa Networks VNX301시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다. ExamPassdump의 IT전문가들이 자신만의 경험과 끊임없는 노력으로 최고의Versa Networks VNX301학습자료를 작성해 여러분들이Versa Networks VNX301시험에서 패스하도록 도와드립니다.

Versa Networks VNX301 시험요강:

주제소개
주제 1
  • Versa Security Services: Addresses the integrated security capabilities within Versa SD-WAN, such as next-generation firewall, IPS
  • IDS, URL filtering, and segmentation.
주제 2
  • Configuration and Provisioning: Covers how to deploy, configure, and onboard SD-WAN devices and services using Versa Director, including templates and zero-touch provisioning workflows.
주제 3
  • Versa SD-WAN Services: Covers the WAN services delivered through Versa's platform, including application steering, traffic policies, SLA monitoring, and link aggregation.
주제 4
  • SD-WAN Network Topologies and Routing Concepts: Examines the various deployment topologies such as hub-and-spoke or full-mesh, along with routing protocols and path selection mechanisms used across the WAN.
주제 5
  • SD-WAN Infrastructure Administration: Focuses on day-to-day operational tasks including monitoring, troubleshooting, software management, and maintaining the health of the SD-WAN environment.

>> VNX301최고품질 인증시험 기출자료 <<

VNX301인기자격증 시험덤프 - VNX301최고품질 덤프샘플문제

ExamPassdump 질문 풀은 실제시험 변화의 기반에서 스케줄에 따라 업데이트 합니다. 만일 Versa Networks VNX301테스트에 어떤 변화가 생긴다면, 적중율이 항상 98% 이상을 유지 할 수 있도록 2일간의 근무일 안에 제품을 업데이트 하도록 합니다. ExamPassdump는 고객들이 테스트에 성공적으로 합격 할 수 있도록 하기 위하여 업데이트 된 버전을 구매후 서비스로 제공해드립니다. 시험에서 불합격받으셨는데 업데이트가 힘든 상황이면 덤프비용을 환불해드립니다.

최신 Administrator SD-WAN Specialist VNX301 무료샘플문제 (Q15-Q20):

질문 # 15
A branch device is stuck after staging. The Controller does not show the expected branch lifecycle notification. Which statement best describes the role of MP-BGP in the provider organization for this process?

정답：C

설명：
The correct answer is A . Versa branch troubleshooting documentation states that the provider organization should have MP-BGP configured for SD-WAN deployments so that notifications for all relevant branch events are delivered to the Versa Director node. This is significant during onboarding because branch lifecycle events, such as branch-connect and branch-disconnect, help Director determine where the branch is in the staging process and whether the next configuration push should occur.
MP-BGP does not replace IKE or IPsec. The branch still establishes IKE/IPsec to the staging server or Controller depending on the staging phase. MP-BGP also has nothing to do with URL filtering category updates. While BGP can be used in LAN or WAN routing designs, the specific issue described here concerns provider-organization SD-WAN control-plane event delivery.
Therefore, if branch lifecycle events are not appearing properly, validating provider-organization MP- BGP configuration is part of the correct troubleshooting workflow, especially in addition to checking data-path and IPsec connectivity.


질문 # 16
A CGNAT pool shows repeated alloc-failures and increasing free-failures . Which troubleshooting approach is most appropriate?

정답：C

설명：
The correct answer is A . Versa CGNAT troubleshooting documentation provides a clear workflow for CGNAT issues. It first describes how to view CGNAT summary information using show orgs org-services < org > cgnat summary. It then shows how to view per-pool statistics using show orgs org-services < org > cgnat pools < pool-name > statistics. The sample output includes counters such as bindings-allocated , bindings-freed , alloc-failures , free-failures , out-of-address-errors , and out-of-ports-errors .
If these counters indicate failures, the next step is to inspect CGNAT state inside the vsmd daemon, including tenant state, ACL matching, pools, bindings, and source-port resources. This helps determine whether the issue is pool exhaustion, rule mismatch, resource allocation failure, or stale runtime state.
OSPF may affect routing but does not explain CGNAT allocation counters. Analytics may store logs but is not the dataplane authority for NAT allocation. Rebooting Analytics would not resolve CGNAT resource programming on the VOS device.


질문 # 17
You want to test a WAN circuit in a way that more closely simulates a single SCP or FTP file transfer. Which method should you use?

정답：B

설명：
The correct answer is B . Versa documentation for internet speed tests explains that when you run an internet speed test from a Director node, it creates approximately 200 sessions . This is useful for measuring aggregate throughput, but it does not represent the behavior of a single application flow. The same documentation states that you can run a speed test with a single session from the device CLI, and that this is useful for simulating file transfer rates when using SCP or FTP .
Therefore, when the goal is to understand how a single file transfer behaves, the CLI-based single-session test is the best option. A default Director-based test may produce higher aggregate results because multiple sessions can use parallelism and better fill the pipe.
show interfaces brief is useful for interface status and addressing, but it does not measure file-transfer throughput. SLA latency is useful for path-quality monitoring, but latency alone does not show single- session TCP throughput.


질문 # 18
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?

정답：A

설명：
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.


질문 # 19
A customer is running VOS Release 22.1.3 on both the speed-test client and server. Which sequence is used by the Versa speed test to calculate bandwidth?

정답：B

설명：
The correct answer is C . Versa documentation states that for Releases 22.1.3 and later , the speed test factors in network latency to derive results. In these releases, the speed test is performed in three stages : a ping test, an upload test, and a download test. The ping test calculates link latency, and the speed test uses that latency data while performing the upload and download portions.
The same documentation notes that the speed test can measure bandwidth speeds up to 1 Gbps, with actual measurement depending on factors such as in-path shapers and latency. It also states that the test may use up to 45 MB of data per upload or download in the best case and 90 MB for a complete test.
Older releases behave differently. For Releases 21.2 and earlier, the speed test is performed in two stages: upload and download. Therefore, because the question specifically states Release 22.1.3 on both client and server, the correct sequence is ping, upload, and download.


질문 # 20
......

ExamPassdump에서 제공해드리는 IT인증시험대비 덤프를 사용해보신적이 있으신지요? 만약에 다른 과목을 사용해보신 분이라면 Versa Networks VNX301덤프도 바로 구매할것입니다. 첫번째 구매에서 패스하셨다면 덤프에 신뢰가 있을것이고 불합격받으셨다하더라도 바로 환불해드리는 약속을 지켜드렸기때문입니다. 처음으로 저희 사이트에 오신 분이라면Versa Networks VNX301덤프로 첫구매에 도전해보지 않으실래요? 저희 덤프로 쉬운 자격증 취득이 가능할것입니다.

VNX301인기자격증 시험덤프: https://www.exampassdump.com/VNX301_valid-braindumps.html

Report this wiki page